Everbuild Opti-Mix Integral Waterproofer is a plasticiser, waterproofing agent and salt inhibitor, all in one.
Supplied in 1 Litre containers, concentrated solution.
Description
Everbuild Opti-Mix Integral Waterproofer
Everbuild Opti-Mix Integral Waterproofer waterproofs, plasticises and retards with an easily controlled dosage, a consistent mix design and is easy to use with no waste.
Everbuild Opti-Mix Integral Waterproofer can be used for the following applications:
Pool and Tank Linings.
External Renders.
External Pointing.
Structures Below Ground Level.
Product Benefits:
Concentrated formula: 1 Litre makes 25 Litres of standard Waterproofer.
Easy to use gauged bottle.
Improves water resistance of mortars.
Added plasticising agent improves workability
Provides resistance to freeze/thaw cycling.
Reduces bleeding.
Application
Health & Safety Recommendations:
Take the usual labour hygiene into account.
PPE should be worn during application. See our .
Consult label and material safety data sheet for more information.
Application Method:
Shake bottle well before use. Push the lid downwards and twist anti-clockwise to remove. Squeeze the sides of the bottle to fill the measuring cup to the required
dose (20-40ml per 50kg of cement).
Add Opti-Mix Integral Waterproofer to water and stir / mix well. Dry mix all other ingredients and add sufficient quantities of water / Opti-Mix Integral Waterproofer solution until the desired consistency is achieved.
Never add this product directly to the dry mix, always let down into a portion of gauging water. Replace cap after use.
Limitations:
Do not exceed recommended dosage rate range and DO NOT over mix.
Ensure container is always kept in a secure upright position during both storage and transit.
Air entraining formulation – not intended for structural concrete.
Selection of correct materials and mix design relative to the substrate and exposure levels are of paramount importance.
Materials for External Render systems and application methods should be in line with BS8000 Part 10 1995 “Code of Practice for Plastering and Rendering”.
Dispose of this product and packaging correctly. Do not allow to enter watercourses. Always read label before use and wear suitable protective equipment.
It is the user’s responsibility to determine suitability for use.
